Positioning control for height and tilt adjustment
Digital displays for angle adjustment, cutting height and revolutions per minute
3200 mm cutting length
1250 mm cutting width to the right of the saw blade, measurement indicated on scale
APA saw blade quick-clamping system
Comfort-clamping for longitudinal stop
Height adjustment through double column guide
Fine adjustment for rip fence
Cross carriage with retractable longitudinal fence (usable on both sides)
Table extension
automatic star-delta start off
automatic motor brake
Equipment like Standard modell plus
- saw blade diameter max. 450 mm
- max. cutting height 145 mm
- speed3000/4000/5000/6000 rpm
- parallelogram protection device type 1773-F and protective device with
interchangeable insert wide/thin, for saw blades up to 450 mm , suction
nozzles 80 mm
Super-Mitre-Fix I, mitre fence with autom. length compensation
auxiliary mitre fence
Equipment like Standard modell, plus
- saw blade diameter max. 450 mm
- max. cutting height 145 mm
- revolutions 3000/4000/5000/6000 U/min
- parallelogramm protective device type 1773-F and protective device with
interchangeable insert wide/thin, for saw blades up to 450 mm , suction nozzles 80 mm
Super-Mitre-Fix I, mitre length stop with autom. length compensation
crosscut-mitre fence
scoring unit system AUTO-EPS scoring system QuickStep
Equipment like standard model, plus
- saw blade diameter max. 450 mm
- max. cutting height 145 mm
- revolutions 3000/4000/5000/6000 rpm
- parallelogramm protective device type 1773-F and protective device with
interchangeable insert wide/thin, for saw blades up to 450 mm , suction
nozzles 80 mm
Super-Mitre-Fix I, mitre length stop with autom. length compensation
auxiliary mitre stop
KS-stop electromotively adjustable
control panel at the top
swivelling circular saw protective device incl. Comfort table extension
Continuous speed regulation 1000 - 6000 rpm
Touch screen 17 positioning control
Electrical rise/fall and tilt adjustment
Electrically positionable width stop
Swivelling circular saw protective device
Comfort table extension
Calibration device for automatic calibration of the digital display height adjustment
Super-Mitre-Fix I, mitre length stop with autom. length compensation
Mitre auxiliary fence
APA saw blade quick-clamping system
Comfort clamping for length stop
Height adjustment through double column guide
Cross slides with retractable length stop (usable on both sides)
Table extension
Automatic star/delta starting
Automatic engine brake
Tilting range -45.5 / +45,5°
Positioning control for rise/fall and tilt adjustment
Engine output main engine 7.5 kW (10 HP)
Continuous speed regulation 1500 - 10000 rpm
Tilting range -45.5 / +45.5°
Positioning control for rise/fall and tilt adjustment
Engine output main engine 7.5 kW (10 HP)
Continuous speed regulation 1500 - 10000 rpm
large table top with rotary disk
milling arbor rapid change system HSK-80 (or alternatively HSK-63)
Fence type 216, total adjustment through hand wheel, LCD display and cast iron stop plates
Frame support 1340 mm, retractable up to approx. 970 mm
Tilting range -45.5 / +45.5°
Control system in the control panel at the top
Positioning control for rise/fall? and tilt adjustment, total stop and partial stop
Engine output main engine 7.5 kW (10 HP)
Continuous speed regulation 1500 - 10000 rpm
large table top
milling arbor rapid change system HSK-80 (or optionally HSK-63)
electromechanically positionable fence incl. Iron cast stop plates
Frame support 1340 mm, retractable up to approx. 970 mm
Tilting range -5 to +45°
Speed 3000/4500/6000/9000 rpm
Engine output 5.5 kW/7.5 HP
Clamping 400 V/50 Hz
Table size 1100 x 760 mm
Table height 870 mm
Milling arbor 30 mm, not replaceable
Clamping height 140 mm
Height adjustment 140 mm
Suction nozzles 120 mm , ?2 units
Space requirement 1100 x 1170 mm
Weight approx. 800 kg

 

 

NEOVAL Oil Spray

Excellent flow and gliding characteristics guarantee a deposit-free long-lasting lubrication with a high pressure and temperature resistance.
NEOVAL Oil Spray is an acid and resin-free, highly additivie
mineral oil without solvents, silicone and solid lubricants. The oil is non-toxic, skin-friendly and the smell is pleasant. 
It contains propane/butane propellants, free of CFC
NEOVAL Oil MTO 300, aerosol with a content of 400 ml.

 

art. no. 3300

 

Roller block STATIV

The practical aid at all processing machines. The height adjustment can be carried out easily and continuously through the centrally located hand wheel.

 

Version/Technical data
art. no.
with plastic conveyor roller   3271
Load capacity 500 kg
Length 700 mm
Height min/max 760/1020 mm
Roll diameter 90 mm

 

Version/Technical data art. no.
with all sides roller rail        3276
Load capacity 500 kg
Length 980 mm
Height min/max 700/960 mm

 

 

Tooth setting device for circular saws
type 1760*

for circular saw blades between 140 - 700 mm diameter, span cone for drillings between 15 - 50 mm

Net weight: approx. 6.1 kg

 

art. no. 2225

 

Band saw setting machine type 1026*

for manual operation, for tooth setting of band saw blades between 6 - 50 mm width, tooth widths between 2 - 24 mm.
 Up to 12 mm tooth width, every second tooth can remain as a hob tooth.
The unit is going to be accurate, as the guiding jaws hold the saw blade automatically during the tooth setting process. Unit depth and width can individually be adjusted.

Net weight: approx. 9.3 kg


art. no. 2214

 

Length stop type 617*

for circular saws with swivelling arm, from aluminium profile with extractable extension, color scales, optical enlargement for precise scale reading. Length stop extractable up to 2500 mm stop length with 2 suspended and movable stop clamps.

Net weight: approx. 8.2 kg


art. no. 2009

 

*while stocks last