Tilting spindle moulder

245|100

motorleistung-maschinen-panhans

Motor Power
5,5 kW / 7,5 PH

spannung-maschinen-panhans

VOLTAGE
400 V / 50 Hz

platzbedarf-maschinen-panhans

W x D in mm
1375 x 1480

Precision work in the joinery or workshop requires not only specific tools, but also a solid and reliable Spindle Moulder with a pleasant and advantageous operating concept. With its modern touchscreen control, the tilting spindle moulder PANHANS type 245|100 facilitates precise work in any situation.

With the control, height and tilt adjustment can be positioned automatically and the relevant tool data can be stored. The tool database consists of 3 tools with 20 programs each and can be expanded to up to 500 tools with 100 programs each if required. The control also has numerous safety functions. It monitors all machine and safety-relevant parameters and machine components and communicates with the operator in the event of malfunctions what needs to be done to restore operational readiness.

The fixed milling spindle with a diameter of 30 millimetres is equipped with a quick-clamping device for convenient tool changing. An HSK-80 quick-change system is also available as an option.

The central control panel with the touch screen control is ergonomically placed at eye level and easy to reach and can also be hooked onto the front of the extendable frame support if required.

The supplied safety milling fence type 301 allows total adjustment via a handwheel and partial adjustment via a star knob screw. Also included in the scope of delivery are the Protection and pressure device GAMMA V 1629 as well as the ring fence 1639 Tapoa for accident-free milling of curved workpieces by means of a clamping template.

The milling spindle is driven by a powerful 5.5 kW three-phase motor, whereby the four speeds 3000, 4500, 6000 and 9000 rpm can be set by shifting the drive belt.

The support surface of the finely planed cast iron tabletop can optionally be enlarged with table extensions on one or both sides as well as an extendable frame support.

Numerous options and special accessories are still available for the already generously equipped machine, as well as the possibility of remote maintenance via a LAN or WLAN connection.

ART.-NR.: 4620
panhans-sfm-245-100_1000px

MILLING SPINDLE
Spindle moulder with double-sided tiltable fixed milling spindle for a tilt range of -5° to +45.5°.

MILLING FENCE 301
Total adjustment is carried out manually via 1 handwheel on the right-hand side, positions are indicated via touchscreen to an accuracy of +/- 0.1 mm; partial fence adjustment (chip removal) +5 mm to -25 mm is carried out via a star knob screw on the left-hand side, dimension indication via a mm vernier; die-cast aluminium milling fence with two 500 mm long, face-milled cast fence plates with aluminium splinter tabs.

DIGITALISATION
Remote maintenance, digital data exchange, machine access control, network-compatible machine, plug and play and HOKUBEMA Cloud.

7" TOUCHSCREEN CONTROL
Capacitive touchscreen (scratch and impact resistant), can also be operated with gloves. With language selection menu in German, English and French (other languages on request). It also contains a tool database for up to 3 tools (20 programs per tool).

USB INTERFACE
USB interface for data backups and updates as well as importing tools, programs and users.

SAFETY
Various functions ensure greater safety when working, such as a lockable main switch, warning messages in the event of incorrect operation and an operating hours counter.

PARTIAL FENCE ADJUSTMENT
The partial fence adjustment with chip removal from +5 mm to -25 mm is carried out via a star knob screw on the left-hand side.

OPTION: EXTENDABLE FRAME SUPPORT
Guided in separate bearing blocks on the side of the machine table and smooth-running. With emergency stop button and additional holder for control panel.

sfm-245-100_V1_zeichnung-panhans-1000x1000

TECHNICAL SPECIFICATIONS

Table size 1100 x 760 mm

Table height 870 mm

Clamping height 140 mm

Height adjustment 125 mm

Tilt range from - 5 to + 45.5°

Tool and program memory 3 tools, 20 programs per tool

Speed 3000 / 4500 / 6000 / 9000 rpm

Capacitive 7" touchscreen control, scratch and impact resistant

Protective and pressure device GAMMA V 1629

Ring fence 1639 Tapoa

Milling spindle with quick-release nut 30 mm

Suction nozzles 2 x ø 120 mm

Net weight approx. 800 kg

Play Video

EQUIPMENT DETAILS

245|100 Fraesmasschine PANHANS HOKUBEMA Detail Bedienpanel
EQUIPMENT DETAILS

CONTROL PANEL

For more space during processing, the control panel can be mounted either at the top or bottom.

Fraesmasschine PANHANS HOKUBEMA Detail Anschlag 301
EQUIPMENT DETAILS

MILLING FENCE 301

Total fence adjustment (right) manually via a handwheel on the right-hand side (adjustment range approx. 140 mm) and dimension display via touchscreen +/- 0.1 mm. The partial stop adjustment (chip removal) is carried out via a star knob screw +5 mm to -25 mm with dimension display via mm vernier.

OPTIONS

maschinenfreischaltung-digitalisierung-panhans-hokubema
Option

DIGITISATION: MACHINE RELEASE

The electronic key system is a simple and cost-effective solution for reliable and secure machine access control, which was previously realised with a key switch or password.

To the explanatory video on YouTube

plug-and-play-digitalisierung-panhans-hokubema
Option

DIGITALISATION: Plug and play

Thanks to the sophisticated system, the old control unit can be disconnected in the event of a fault and replaced with a new control unit sent by HOKUBEMA. A simple plug-in system and the bundled technology in one control module enable quick and efficient problem solving.

To the explanatory video on YouTube

fernwartung-digitalisierung-panhans-hokubema
Option

DIGITALISATION: Remote maintenance

In the event of a machine malfunction, the system can be accessed remotely and dealt with by the service module. The service technician can then rectify the problem in real time.

cloud-digitalisierung-panhans-hokubema
Option

DIGITALISATION: HOKUBEMA Cloud

The user interface offers a cloud-based connection for networked working. This gives companies greater independence and a powerful software solution with stability, performance and a high level of security. Digital data exchange makes it easy to download and install updates.

View HOKUBEMA-CLOUD

245|100 Fraesmasschine PANHANS HOKUBEMA Detail Spannzangendorn
Option

CLAMPING ARBOR

Optional clamping arbor for the HSK 80 quick-change system. With nut and hook spanner without collet, quick-change milling arbor, dynamically balanced for optimum concentricity for holding shank tools, the necessary collets are required depending on the shank diameter.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag
Option

INTEGRAL FENCE PLATES IN-/OUTFEED SIDE 650/500 MM

With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adjustment to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast iron fence plates.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag
Option

INTEGRAL FENCE PLATES IN-/OUTFEED SIDE 650/650 MM

With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adjustment to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast iron fence plates.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag
Option

Integral fence plates infeed/outfeed side 500/500 mm

With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adaptation to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast fence plates.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Drehteller
Option

TURNTABLE

The turntable can be used to rotate the milling fence type 216 on the machine table by 360°.

Fraesmasschine PANHANS HOKUBEMA Detail Sicherheitslineale
Option

SAFETY GUIDE BAR SET FOR MILLING FENCES

As a continuous guide between the two fence plates, consisting of: 2 safety guide bars 260 x 6 mm, 3 safety guide bars 260 x 3 mm, 1 grooved board made of multiplex 260 x 150 x 12 mm, incl. sliding blocks and Allen key.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat PV 84
Option

POWER FEEDER PV 84

4 rollers 120 x 60 mm, 8 speeds: 2/4/5.6/6.7/11/13/16.5/33 m/min, clockwise and anti-clockwise rotation, stand with extension arm 1050 mm, can be used individually horizontally and vertically, incl. mounting, cable and plug.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Variomatic 4 N
Option

POWER FEEDER VARIOMATIC 4 N

4 rollers, infinitely variable feed rate from 2 - 18 m/min clockwise and anti-clockwise rotation, quick change from horizontal to vertical use. Easy swivelling and positioning with memory lock system. With comfort stand, numerical height display, extension arm 1050 mm long, incl. mounting, cable and plug.

245|20 Fraesmasschine PANHANS HOKUBEMA Detail Zeromaster Referenzmass-Einstellgerät
Option

ZEROMASTER CALIBRATOR

For exact 0-point height adjustment and referencing of the cutter head in relation to the table top.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Tischschieber
Option

SLIDE PLATE FOR TABLE TOP 1100 X 760 MM

The patented slide plate with grid structure does not change the overall depth when the table slide is set to the maximum table openings. For easy operation, the distance between the front edge and the spindle remains the same. The table slide is infinitely adjustable in depth. A high fitting accuracy without interfering edges is guaranteed.

Fraesmasschine PANHANS HOKUBEMA Detail Rolltisch
Option

SLIDE TABLE

With fence holder and eccentric clamp, clamping table can be pushed in up to the milling spindle incl. safety guard 1641, suction nozzle Ø 120 mm, with stepped height adjustment, upper position as slide table, lower position as table extension on the left.

Fraesmasschine PANHANS HOKUBEMA Detail Konsole Wegschwenkbar
Option

Swivelling console

Mounted on the left of the machine stand with joint for swivelling away the power feeder, mandatory for slide table no. 4491.1 as well as milling fences 204, 302, 320 and integral fence plates 650 + 650 mm.

Fraesmasschine PANHANS HOKUBEMA Detail Centrex
Option

CENTREX

Protective and pressure device for securely holding workpieces in place during manual milling work; the special shape of the pressure shoe ensures precise workpiece guidance during all milling work, attached to the milling fence, can be folded up, instead of the standard GAMMA V 1629 protective and pressure device.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Zapfenschneid- und Schlitzapparat 1376
Option

TENONING AND SLOTTING DEVICE 1376

Mounted on the machine table for light tenoning and slotting work with eccentric clamp and mitre-adjustable stop. Sliding stroke 710 mm, height above table approx. 56 mm. The safety guard type 1641 must be used when working with the 1376 tenoning and slotting device.

Fraesmasschine PANHANS HOKUBEMA Detail Laengenanschlag LAS M
Option

CROSS-CUT FENCE LAS-M AND EXTENSION

With its length of 1750 mm, the LAS-M cross-cut fence is the ideal complement to the slide table with article number 4491.1. As a further option, the extension to the LAS-M cross-cut fence can be extended up to 2750 mm.

Fraesmasschine PANHANS HOKUBEMA Detail Rolltisch
Option

SLIDE TABLE

With stop fixture and eccentric clamp, clamping table can be pushed in up to the milling spindle, incl. safety guard 1641, suction nozzle Ø 120 mm, with stepped height adjustment, upper position as slide table, lower position as table extension on the left.

Fraesmasschine PANHANS HOKUBEMA Detail Anschlag 302
Option

MILLING FENCE 302

Total and partial fence adjustment (chip removal) is performed manually via 2 handwheels. Adjustment range
of the total fence approx. 140 mm (left), partial fence adjustment approx. +10 mm/-22 mm (right). The dimensional display for total and partial fences is accurate to +/- 0.1 mm via touchscreen. (Photo with optional integral fence plates)

Fraesmasschine PANHANS HOKUBEMA Detail Anschlag 311
Option

MILLING FENCE 311

The total fence adjustment is motorised, the partial fence adjustment (chip removal) is carried out via a star knob screw on the left-hand side. The dimension display for total fence is via touchscreen and for partial fence via a vernier.

Fraesmasschine PANHANS HOKUBEMA Detail Anschlag 320
Option

MILLING FENCE 320

The safety milling fence 320 with total fence and partial fence adjustment (chip removal) is completely electronically controlled. Dimensions are entered via the numeric keypad on the touchscreen and positioning is completely motorised. (Photo with optional integral fence plates)

245|20 Fraesmasschine PANHANS HOKUBEMA Detail HSK-80
Option

MANUAL MILLING ARBOR QUICK-CHANGE SYSTEM HSK-80

Instead of fixed standard milling spindle, optional HSK system as interface for various clamping spigot diameters with 30 mm milling arbor and quick-release nut. Unique system, as it ensures greater concentricity and enables easy replacement of the milling arbours. Other mandrels with different Ø available on request. Optionally with spanner nut instead of quick-release nut.

245_100-Fraesmasschine PANHANS HOKUBEMA Detail Comfort-Wegschwenkvorrichtung für Fräsanschläge
Option

COMFORT SWIVEL-AWAY DEVICE FOR MILLING FENCES

Electromotive raising and lowering, the fence can be rotated 360° around the guide column and also swivelled forwards.