Tilting spindle moulder
245|100
MOTOR POWER
5.5 kW / 7.5 HP
VOLTAGE
400 V / 50 Hz
W x D in mm
1375 x 1480
Precision work in the joinery or workshop requires not only specific tools, but also a solid and reliable Spindle Moulder with a pleasant and advantageous operating concept. With its modern touchscreen control, the tilting spindle moulder PANHANS type 245|100 facilitates precise work in any situation.
With the control, height and tilt adjustment can be positioned automatically and the relevant tool data can be stored. The tool database consists of 3 tools with 20 programs each and can be expanded to up to 500 tools with 100 programs each if required. The control also has numerous safety functions. It monitors all machine and safety-relevant parameters and machine components and communicates with the operator in the event of malfunctions what needs to be done to restore operational readiness.
The fixed milling spindle with a diameter of 30 millimetres is equipped with a quick-clamping device for convenient tool changing. An HSK-80 quick-change system is also available as an option.
The central control panel with the touch screen control is ergonomically placed at eye level and easy to reach and can also be hooked onto the front of the extendable frame support if required.
The supplied safety milling fence type 301 allows total adjustment via a handwheel and partial adjustment via a star knob screw. Also included in the scope of delivery are the Protection and pressure device GAMMA V 1629 as well as the ring fence 1639 Tapoa for accident-free milling of curved workpieces by means of a clamping template.
The milling spindle is driven by a powerful 5.5 kW three-phase motor, whereby the four speeds 3000, 4500, 6000 and 9000 rpm can be set by shifting the drive belt.
The support surface of the finely planed cast iron tabletop can optionally be enlarged with table extensions on one or both sides as well as an extendable frame support.
Numerous options and special accessories are still available for the already generously equipped machine, as well as the possibility of remote maintenance via a LAN or WLAN connection.
| Technische Daten | |
|---|---|
| Tischgröße | 1100 x 760 mm |
| Tischhöhe | 870 mm |
| Einspannhöhe | 140 mm |
| Höhenverstellung | 125 mm |
| Schwenkbereich | von - 5 bis + 45,5° |
| Werkzeug- und Programmspeicher | 3 Werkzeuge, 20 Programme je Werkzeug |
| Drehzahl | 3000 / 4500 / 6000 / 9000 U/min |
| Steuerung: Kapazitiver 7“-Touchscreen | kratz- und stoßfest |
| Frässchutz- und Druckvorrichtung | GAMMA V 1629 |
| Bogenfräsanschlag | 1639 Tapoa |
| Frässpindel mit Schnellspannmutter | 30 mm |
| Absaugstutzen | 2 x ø 120 mm |
| Gewicht netto | ca. 800 kg |
ART.-NR.: 4620
MILLING SPINDLE
Spindle moulder with double-sided tiltable fixed milling spindle for a tilt range of -5° to +45.5°.
MILLING FENCE 301
Total adjustment is carried out manually via 1 handwheel on the right-hand side, positions are indicated via touchscreen to an accuracy of +/- 0.1 mm; partial fence adjustment (chip removal) +5 mm to -25 mm is carried out via a star knob screw on the left-hand side, dimension indication via a mm vernier; die-cast aluminium milling fence with two 500 mm long, face-milled cast fence plates with aluminium splinter tabs.
DIGITALISATION
Remote maintenance, digital data exchange, machine access control, network-compatible machine, plug and play and HOKUBEMA Cloud.
7" TOUCHSCREEN CONTROL
Capacitive touchscreen (scratch and impact resistant), can also be operated with gloves. With language selection menu in German, English and French (other languages on request). It also contains a tool database for up to 3 tools (20 programs per tool).
USB INTERFACE
USB interface for data backups and updates as well as importing tools, programs and users.
SAFETY
Various functions ensure greater safety when working, such as a lockable main switch, warning messages in the event of incorrect operation and an operating hours counter.
PARTIAL FENCE ADJUSTMENT
The partial fence adjustment with chip removal from +5 mm to -25 mm is carried out via a star knob screw on the left-hand side.
OPTION: EXTENDABLE FRAME SUPPORT
Guided in separate bearing blocks on the side of the machine table and smooth-running. With emergency stop button and additional holder for control panel.
EQUIPMENT DETAILS + OPTIONS
CONTROL PANEL
For more space during processing, the control panel can be mounted either at the top or bottom.
MILLING FENCE 301
Total fence adjustment (right) manually via a handwheel on the right-hand side (adjustment range approx. 140 mm) and dimension display via touchscreen +/- 0.1 mm. The partial stop adjustment (chip removal) is carried out via a star knob screw +5 mm to -25 mm with dimension display via mm vernier.
MILLING FENCE 302
Total and partial fence adjustment (chip removal) is performed manually via 2 handwheels. Adjustment range
of the total fence approx. 140 mm (left), partial fence adjustment approx. +10 mm/-22 mm (right). The dimensional display for total and partial fences is accurate to +/- 0.1 mm via touchscreen. (Photo with optional integral fence plates)
MILLING FENCE 311
The total fence adjustment is motorised, the partial fence adjustment (chip removal) is carried out via a star knob screw on the left-hand side. The dimension display for total fence is via touchscreen and for partial fence via a vernier.
MILLING FENCE 320
The safety milling fence 320 with total fence and partial fence adjustment (chip removal) is completely electronically controlled. Dimensions are entered via the numeric keypad on the touchscreen and positioning is completely motorised. (Photo with optional integral fence plates)
ZEROMASTER CALIBRATOR
The Zeromaster is the PANHANS reference dimension setting device and ensures short set-up times for tool calibration.
PROTECTIVE AND PRESSURE DEVICE CENTREX 1624
Ensures secure fixing of workpieces during manual milling work. The special shape of the pressure shoe ensures precise workpiece guidance for all milling work and is infinitely adjustable horizontally and vertically. Always with a good view of the workpiece. Suitable for all milling fences.
MANUAL MILLING ARBOR QUICK-CHANGE SYSTEM HSK-80
Instead of fixed standard milling spindle, optional HSK system as interface for various clamping spigot diameters with 30 mm milling arbor and quick-release nut. Unique system, as it ensures greater concentricity and enables easy replacement of the milling arbours. Other mandrels with different Ø available on request. Optionally with spanner nut instead of quick-release nut.
CLAMPING ARBOR
Optional clamping arbor for the HSK 80 quick-change system. With nut and hook spanner without collet, quick-change milling arbor, dynamically balanced for optimum concentricity for holding shank tools, the necessary collets are required depending on the shank diameter.
COMFORT SWIVEL-AWAY DEVICE FOR MILLING FENCES
Electromotive raising and lowering, the fence can be rotated 360° around the guide column and also swivelled forwards.
SAFETY GUIDE BAR SET FOR MILLING FENCES
As a continuous guide between the two fence plates, consisting of: 2 safety guide bars 260 x 6 mm, 3 safety guide bars 260 x 3 mm, 1 grooved board made of multiplex 260 x 150 x 12 mm, incl. sliding blocks and Allen key.
DIGITALISIERUNG: MASCHINENFREISCHALTUNG
Das elektronische Schlüsselsystem ist eine einfache und kostengünstige Lösung für eine zuverlässige und sichere Maschinen-Zugangskontrolle, die bisher mit einem Schlüsselschalter oder Passwort realisiert wurde.
Zum Erklärvideo auf Youtube
DIGITALISIERUNG: Plug and play
Durch das durchdachte System kann bei einem Störfall die alte Steuerung abgesteckt und durch eine neue von HOKUBEMA gesendete Steuerung ausgetauscht werden. Ein einfaches Stecksystem und die gebündelte Technik in einem Steuerungsmodul ermöglichen eine schnelle und effiziente Problemlösung.
Zum Erklärvideo auf Youtube
DIGITALISIERUNG: Fernwartung
Sollte es zu einem Störfall bei der Maschine kommen, kann per Fernwartung auf das System zugegriffen und bereits durch das Service-Modul behandelt werden. Der Service-Technik kann so in Echtzeit das Problem beheben.
DIGITALISIERUNG: HOKUBEMA-Cloud
Für das vernetze Arbeiten bietet die Bedienoberfläche eine cloudbasierte Anbindung. So sind Unternehmen unabhängiger und erhalten eine starke Software-Lösung mit Stabilität, Leistung und ein hohes Maß an Sicherheit. Der digitale Datenaustausch ermöglicht das einfach Herunterladen und Einspielen von Updates.
HOKUBEMA-CLOUD ansehen.
TURNTABLE
This allows the milling fence on the machine table to be rotated by 360° (only for table top 1100 x 760 mm).
INTEGRAL FENCE PLATES IN-/OUTFEED SIDE 650/500 MM
With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adjustment to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast iron fence plates.
INTEGRAL FENCE PLATES IN-/OUTFEED SIDE 650/650 MM
With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adjustment to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast iron fence plates.
INTEGRAL FENCE PLATES IN-/OUTFEED SIDE 500/500 MM
With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adjustment to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast iron fence plates.
SLIDE TABLE
With fence holder and eccentric clamp, clamping table can be pushed in up to the milling spindle incl. safety guard 1641, suction nozzle Ø 120 mm, with stepped height adjustment, upper position as slide table, lower position as table extension on the left.
POWER FEEDER PV 84
4 rollers 120 x 60 mm, 8 speeds: 2/4/5.6/6.7/11/13/16.5/33 m/min, clockwise and anti-clockwise rotation, stand with extension arm 1050 mm, can be used individually horizontally and vertically, incl. mounting, cable and plug.
POWER FEEDER VARIOMATIC 4 N
4 rollers, infinitely variable feed rate from 2 - 18 m/min clockwise and anti-clockwise rotation, quick change from horizontal to vertical use. Easy swivelling and positioning with memory lock system. With comfort stand, numerical height display, extension arm 1050 mm long, incl. mounting, cable and plug.
SWIVELLING CONSOLE
The patented slide plate with grid structure does not change the overall depth when the table slide is set to the maximum table openings. For easy operation, the distance between the front edge and the spindle remains the same. The table slide is infinitely adjustable in depth. A high fitting accuracy without interfering edges is guaranteed.
Rigid console
For mounting a power feeder approx. 195 x 180 mm on the left side of the table top. Mandatory when using milling fences 204, 302, 320 and integral fence plates 650 + 650 mm with table top 1100 x 760 mm.
SLIDE PLATE FOR TABLE TOP 1100 X 760 MM
The patented slide plate with grid structure does not change the overall depth when the table slide is set to the maximum table openings. For easy operation, the distance between the front edge and the spindle remains the same. The table slide is infinitely adjustable in depth. A high fitting accuracy without interfering edges is guaranteed.
TENONING AND SLOTTING DEVICE 1376
Mounted on the machine table for light tenoning and slotting work with eccentric clamp and mitre-adjustable stop. Sliding stroke 710 mm, height above table approx. 56 mm. The safety guard type 1641 must be used when working with the 1376 tenoning and slotting device.
CROSS-CUT FENCE LAS-M AND EXTENSION TO LAS-M
With its length of 1750 mm, the LAS-M cross-cut fence is the ideal complement to the slide table with article number 4491.1. As a further option, the extension to the LAS-M cross-cut fence can be extended up to 2750 mm.
Technical extension
-
STILT RANGE OF THE MILLING SPINDLE +/- 45.5°
Instead of +45.5° to -5°
ART. NO. 4541
-
DRIVE MOTOR
Drive motor with 7.5 kW (10 HP) instead of 5.5 kW
ART. NO. 4271
Milling fence accessories
-
MILLING FENCE 311
Total adjustment is electromotive, adjustment range approx. 140 mm, dimension input via keyboard, dimension display total fence via touchscreen +/- 0.1 m. Partial fence adjustment (chip removal) +5 mm to -25 mm via a star knob screw on the left side, dimension display via one mm vernier; clamping on the machine table manually via screw clamping lever; milling fence made of die-cast aluminium with 2 face-milled, 500 mm long cast fence plates with aluminium splinter tabs; maximum possible tool diameter is 250 mm.
ART- NO. 4625
-
MILLING FENCE 302
Total fence adjustment and partial fence adjustment (chip removal) is carried out manually via 2 handwheels, the dimension display for total fence and partial fence via touchscreen +/- 0.1 mm; total fence adjustment, adjustment range approx. 140 mm via handwheel on the left side; partial fence adjustment (chip removal) approx. +10 mm/-22 mm via handwheel on the right-hand side; clamping/fixing on the machine table is done manually via the comfort quick clamping system; milling fence made of die-cast aluminium with 2 face-milled cast fence plates 500 mm long and aluminium splinter tabs; maximum possible tool diameter is 250 mm; Note: The optional turntable is not available in conjunction with milling fence 302. Recommendation: Large table top 1340 x 800 mm No. 4423.1
ART. NO. 4624
-
MILLING FENCE 320
Electronic adjustment of total fence and partial fence via 2 motors. Adjustment range of the total fence is 140 mm; adjustment range of the partial fence is +10 mm to -22 mm; control is via the keypad on the touchscreen; total fence and partial fence dimensions are displayed on the touchscreen with an accuracy of +/- 0.1 mm; motorised clamping on the machine table for total and partial fence; milling fence made of die-cast aluminium with 2 face-milled 500 mm long cast fence plates with aluminium splinter tabs; maximum possible tool diameter is 250 mm; Note: The optional turntable is not available in conjunction with milling fence 320. Recommendation: Large table top 1340 x 800 mm No. 4423.1
ART. NO. 4623
Accessorial milling spindles and arbors
-
MILLING SPINDLE Ø 50 MM
Non-replaceable, dynamically balanced for optimum concentricity, clamping height 160 mm with milling arbor rings and milling cutter quick-clamping device via Allen key with spindle lock, instead of standard milling spindle 30 mm (note: others on request)
ART. NO. 4152
Table system accessories
-
EXTENDABLE FRAME SUPPORT, FOR TABLE TOP 1100 X 760 MM
Total length approx. 1375 mm, extension depth approx. 892 mm from the centre of the milling spindle, guided in separate bearing blocks on the side of the machine table, smooth-running and with emergency stop button
ART. NO. 4232
-
TABLE TOP EXTENSION ON BOTH SIDES
For table top 1100 x 760 mm, total length 2300 mm, consisting of 2 finely planed cast table tops as extensions on the left and right of the standard machine table with smooth-running frame support approx. 892 mm extendable to the front, incl. emergency stop button
ART. NO. 4465
-
TABLE TOP EXTENSION ON BOTH SIDES
For table top 1340 x 800 mm, total length 2500 mm, consisting of 2 pieces of finely planed cast table tops as an extension on the left and right of the standard machine table, with smooth-running frame support approx. 970 mm extendable forwards with emergency stop button
ART. NO. 4215
-
TABLE TOP EXTENSION ONE-SIDED RIGHT
For table top 1340 x 800 mm, consisting of 1 piece of finely planed cast table top as an extension to the right of the standard machine table, therefore total length 1950 mm including smooth-running frame support, can be extended forwards by approx. 970 mm, incl. emergency stop button
ART. NO. 4217
-
LARGE TABLE TOP, SIZE 1340 X 800 MM, WITH TURNTABLE
And frame support 1340 mm, extendable up to approx. 970 mm instead of standard table top 1100 x 760 mm, option: table top extension Art. No. 4215, table slide not possible
ART. NO. 4423
-
LARGE TABLE TOP, SIZE 1340 X 800 MM, WITHOUT TURNTABLE
With frame support 1340 mm extendable up to approx. 970 mm instead of standard table top 1100 x 760 mm, option: table top extension Art. No. 4215
ART. NO. 4423.1
-
KICK-BACK GUARD 1648
For accident-proof insert milling of long and short parts, infinitely adjustable from 0 - 1500 mm for milling machines with table extension
ART. NO. 2002
Special accessories
-
RFID MACHINE ACCESS CONTROL
User database and key system TM-300 for machine access control with personalised keys, full version for authorised and instructed persons, including master key with which parameter settings and employee instructions can be carried out, including 5 tags for different users
ART. NO. 4654
Accessorial services
-
INSTALLATION OF A POWER FEEDER
Delivery to us by the customer with carriage paid delivery
ART. NO. 4028
-
BRIEFING BY FACTORY TECHNICIAN
Or training at the Sigmaringen plant for the machine ordered, plus travel expenses if instruction is given at the customer's premises.
ART. NO. 4172
-
WARRANTY PLUS+12
12 months extended warranty on parts (following the statutory warranty period of 12 months). Does not apply to wear parts.
ART. NO. 4259
-
MAINTENANCE AND INSPECTION
Annual maintenance and inspection on site according to maintenance schedule, spare parts are charged plus travel expenses.
ART. NO. 4175