Tilting spindle moulder

245|200

motorleistung-maschinen-panhans

MOTOR POWER
7,5 kW / 10 hp

spannung-maschinen-panhans

VOLTAGE
400 V / 50 Hz

platzbedarf-maschinen-panhans

W x D in mm
1375 x 1480

With the PANHANS tilting spindle moulder type 245|200, you will always work efficiently and economically in your joinery, carpentry or workshop, as the set-up times and the resulting requirements are considerably reduced thanks to the sophisticated operating concept.

This is made possible, among other things, by the modern touchscreen control with integrated tool database and program memory as well as the 45° tiltable milling spindle on both sides. The spindle (as well as the tool height) can be positioned fully automatically on the basis of target value entries via the touchscreen of the control. Only the safety milling fence must be adjusted manually, whereby the position of the total fence is indicated digitally on the handwheel.

By storing the tool data of various milling cutters and assigning a program, individual machining operations can be called up and executed quickly and easily. The tool memory comprises 5 tools with 20 possible programs each and can optionally be extended to up to 500 tools with 100 programs each.

The spindle, which is tiltable by 45° to the rear, offers the advantage of increased safety as well as the simultaneous use of a (optionally available) power feeder when the spindle is tilted.

Apart from the positioning tasks of the height and tilt axis and the tool database, the network-compatible control still has countless features and safety functions. During operation, it forms the interface between man and machine by monitoring all machine components and shutting down the machine in case of pending problems (malfunctions, errors and dangers). The operator is informed via a message window what is wrong and how to eliminate the pending problem.

The generously dimensioned 7.5 kW three-phase motor is equipped with a wear-free electronic brake and offers sufficient power for all tasks at hand. It is also characterised by its very smooth running. The spindle speed can be conveniently and continuously adjusted in the range 1500 to 10000 rpm via the control.

The high-quality machine components and the generous basic equipment, including all necessary safety devices, leave hardly anything to be desired. Numerous options and useful special accessories are also available.

Technische Daten
Tischgröße 1100 x 760 mm
Tischhöhe 905 mm
Einspannhöhe 140 mm
Höhenverstellung 125 mm
Schwenkbereich von +/- 45,5°
Werkzeug- und Programmspeicher 5 Werkzeuge, je Werkzeug 20 Programme
Stufenlose Drehzahlregulierung 1500 – 10000 U/min
Steuerung: Kapazitiver 7“-Touchscreen kratz- und stoßfest
Frässchutz- und Druckvorrichtung GAMMA V 1629
Bogenfräsanschlag 1639 Tapoa
Frässpindel mit Schnellspannmutter 30 mm
Absaugstutzen 2 x ø 120 mm
Gewicht netto ca. 880 kg
ART. NO. 4621
panhans-sfm-245-200_1000px

MILLING SPINDLE
Fixed and double-sided tiltable by +/- 45.5° with quick-release nut.

7" TOUCHSCREEN CONTROL
Capacitive touchscreen (scratch and impact resistant), can also be operated with gloves. With language selection menu in German, English and French (other languages on request). It also contains a tool database for up to 5 tools (20 programs are possible per tool). Height and tilt adjustment with electrical position and speed indication, as well as zeroing of height and offset dimension.

PARTIAL FENCE ADJUSTMENT
The partial fence adjustment with chip removal from +5 mm to -25 mm is carried out via a star knob screw on the left-hand side.

SPEED CONTROL
Electronic, infinitely variable speed control from 1,500 - 10,000 rpm (11 kW frequency converter).

OPTION: TABLE EXTENSION
Table extension on both sides with extendable frame support.

OPTION: TABLE SLIDE PLATE
The slide plate enables the table opening to be adjusted quickly and continuously without tools.

DIGITALISATION
Remote maintenance, digital data exchange, machine access control, network-compatible machine, plug and play and HOKUBEMA Cloud.

EQUIPMENT DETAILS + OPTIONS

245|100 Fraesmasschine PANHANS HOKUBEMA Detail Steuerung

CONTROL UNIT

The touchscreen control enables convenient communication between operator and machine. Programme sequences and command inputs can be controlled directly by touching the smooth monitor surface. Particular emphasis is placed on intuitive and simple operation. For optimum readability, the displays are designed with high brightness and optimum contrast.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Rahmenauflage ausziehbar

EXTENDABLE FRAME SUPPORT

The frame support is extendable and has an extension depth of approx. 892 mm from the centre of the milling spindle. This support is guided smoothly in separate bearing blocks on the side of the machine table. Additionally equipped with an emergency stop button, safe working is guaranteed.

Fraesmasschine PANHANS HOKUBEMA Detail Konsole Starr

RIGID CONSOLE FOR POWER FEEDER

The rigid console is used to mount a power feeder and is required for versions with a slide table. The removable consoles are made of a high-strength metal alloy.

Fraesmasschine PANHANS HOKUBEMA Detail Konsole Wegschwenkbar

SWIVELLING CONSOLE

With this option, the power feeder can be swiveled away so you can work freely on the machine table. This optimizes the workflow because the feed unit does not have to be removed to work with the curved milling fence.

245|20 Fraesmasschine PANHANS HOKUBEMA Detail Zeromaster Referenzmass-Einstellgerät

ZEROMASTER CALIBRATOR

For exact 0-point height adjustment of the milling tool in relation to the table top.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Drehteller

TURNTABLE

This allows the milling fence on the machine table to be rotated by 360° (only for table top 1100 x 760 mm).

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Tischschieber

SLIDE PLATE FOR TABLE TOP 1100 X 760 MM

The patented slide plate with grid structure does not change the overall depth when the table slide is set to the maximum table openings. For easy operation, the distance between the front edge and the spindle remains the same. The table slide is infinitely adjustable in depth. A high fitting accuracy without interfering edges is guaranteed.

245|200 Fraesmasschine PANHANS HOKUBEMA Detail Tischplattenverlaengerung

TABLE TOP EXTENSION ON BOTH SIDES

For table top 1100 x 760 mm, total length 2300 mm, consisting of 2 pieces of finely planed cast iron table tops as an extension on the left and right of the standard machine table, with a smooth-running frame support that can be pulled out to the front by approx. 892 mm and with an emergency stop button.

245|20 Fraesmasschine PANHANS HOKUBEMA Detail Tischplattenverlaengerung Einseitig

TABLE TOP EXTENSION ONE-SIDED RIGHT

For table top 1340 x 800 mm, consisting of 1 piece of finely planed cast table top as an extension on the right of the standard machine table, therefore total length 1950 mm including smooth-running frame support approx. 970 mm, extendable forwards and with emergency stop button.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Rueckschlagschutz 1648

KICKBACK GUARD 1648

For accident-proof insert milling of long and short parts, infinitely adjustable from 0 – 1500 mm for milling machines with table top extension.

245_100-Fraesmasschine PANHANS HOKUBEMA Detail Comfort-Wegschwenkvorrichtung für Fräsanschläge

COMFORT SWIVEL-AWAY DEVICE FOR MILLING FENCES

Electromotive raising and lowering, the fence can be rotated 360° around the guide column and also swivelled forwards.

maschinenfreischaltung-digitalisierung-panhans-hokubema

DIGITALISIERUNG: MASCHINENFREISCHALTUNG

Das elektronische Schlüsselsystem ist eine einfache und kostengünstige Lösung für eine zuverlässige und sichere Maschinen-Zugangskontrolle, die bisher mit einem Schlüsselschalter oder Passwort realisiert wurde.

Zum Erklärvideo auf Youtube
plug-and-play-digitalisierung-panhans-hokubema

DIGITALISIERUNG: Plug and play

Durch das durchdachte System kann bei einem Störfall die alte Steuerung abgesteckt und durch eine neue von HOKUBEMA gesendete Steuerung ausgetauscht werden. Ein einfaches Stecksystem und die gebündelte Technik in einem Steuerungsmodul ermöglichen eine schnelle und effiziente Problemlösung.

Zum Erklärvideo auf Youtube
fernwartung-digitalisierung-panhans-hokubema

DIGITALISIERUNG: Fernwartung

Sollte es zu einem Störfall bei der Maschine kommen, kann per Fernwartung auf das System zugegriffen und bereits durch das Service-Modul behandelt werden. Der Service-Technik kann so in Echtzeit das Problem beheben.

cloud-digitalisierung-panhans-hokubema

DIGITALISIERUNG: HOKUBEMA-Cloud

Für das vernetze Arbeiten bietet die Bedienoberfläche eine cloudbasierte Anbindung. So sind Unternehmen unabhängiger und erhalten eine starke Software-Lösung mit Stabilität, Leistung und ein hohes Maß an Sicherheit. Der digitale Datenaustausch ermöglicht das einfach Herunterladen und Einspielen von Updates.

HOKUBEMA-CLOUD ansehen.
Fraesmasschine PANHANS HOKUBEMA Detail Sicherheitslineale

SAFETY RULERS FOR MILLING FENCE (1 set)

As a continuous guide between the two fence plates, consisting of: 2 rulers 260 x 6 mm, 3 rulers 260 x 3 mm, 1 fillet board made of multiplex 260 x 150 x 12 mm, incl. sliding blocks and Allen key.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag

INTEGRAL FENCE PLATES INFEED/OUTFEED SIDE 500/500 MM

Electromotive raising and lowering, the fence can be rotated 360° around the guide column and also swivelled forwards.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag

INTEGRAL FENCE PLATES INFEED/OUTFEED SIDE 650/500 MM

With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adjustment to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast iron fence plates.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag

INTEGRAL FENCE PLATES INFEED/OUTFEED SIDE 650/650 MM

With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adaptation to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast fence plates.

Fraesmasschine PANHANS HOKUBEMA Detail Rolltisch

Slide table

With fence holder and eccentric clamp, clamping table can be pushed in up to the milling spindle incl. safety guard 1641, suction nozzle Ø 120 mm, with stepped height adjustment, upper position as slide table, lower position as table extension on the left.

Fraesmasschine PANHANS HOKUBEMA Detail Centrex

CENTREX

Protective and pressure device for securely holding workpieces in place during manual milling work; the special shape of the pressure shoe ensures precise workpiece guidance during all milling work, attached to the milling fence, can be folded up, instead of the standard GAMMA V 1629 protective and pressure device.

Fraesmasschine PANHANS HOKUBEMA Detail HSK-63-F

AUTOMATIC HSK-63-F TOOL CHANGING SYSTEM

Electromechanical clamping system for convenient tool changes. The tool change is actuated via a switch. Includes 1 quick-change arbor HSK-63-F with Ø 30 mm clamping length 140 mm with arbour rings and quick-release nut.

245|20 Fraesmasschine PANHANS HOKUBEMA Detail HSK-80

MANUAL ARBOR QUICK-CHANGE SYSTEM HSK- 80

Instead of fixed standard milling spindle, optional HSK system as interface for various clamping spigot diameters with 30 mm milling arbor and quick-release nut. Unique system, as it ensures greater concentricity and enables easy replacement of the milling arbours. Other mandrels with different Ø available on request. Optionally with spanner nut instead of quick-release nut.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat PV 84

POWER FEEDER PV 84

4 rollers 120 x 60 mm, 8 speeds: 2/4/5.6/6.7/11/13/16.5/33 m/min, clockwise and anti-clockwise rotation, stand with extension arm 1050 mm, can be used individually horizontally and vertically, incl. mounting, cable and plug.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Variomatic 4 N

POWER FEEDER VARIOMATIC 4 N

4 rollers, infinitely variable feed rate from 2 - 18 m/min clockwise and anti-clockwise rotation, quick change from horizontal to vertical use. Easy swivelling and positioning with memory lock system. With comfort stand, numerical height display, extension arm 1050 mm long, incl. mounting, cable and plug.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Zapfenschneid- und Schlitzapparat 1376

TENONING AND SLOTTING DEVICE 1376

Mounted on the machine table for light tenoning and slotting work with eccentric clamp and mitre-adjustable stop. Sliding stroke 710 mm, height above table approx. 56 mm. The safety guard type 1641 must be used when working with the 1376 tenoning and slotting device.

Fraesmasschine PANHANS HOKUBEMA Detail Laengenanschlag LAS M

CROSS-CUT FENCE LAS-M AND EXTENSION TO LAS-M

With its length of 1750 mm, the LAS-M cross-cut fence is the ideal complement to the slide table with article number 4491.1. As a further option, the extension to the LAS-M cross-cut fence can be extended up to 2750 mm.

Technical extension

  • INFINITELY VARIABLE SPEED CONTROL 1500 - 12000 RPM

    7.5 kW motor with 11 kW frequency converter incl. lubrication of the milling spindle bearings

    ART. NO. 4862

Table system accessories

  • EXTENDABLE FRAME SUPPORT, FOR TABLE TOP 1100 X 760 MM

    Total length approx. 1375 mm, extension depth approx. 892 mm from the centre of the milling spindle, guided in separate bearing blocks on the side of the machine table, smooth-running with emergency stop button.

    ART. NO. 4232

  • TABLE TOP EXTENSION ON BOTH SIDES

    For table top 1340 x 800 mm, total length 2500 mm, consisting of 2 pieces of finely planed cast table tops as an extension on the left and right of the standard machine table, with smooth-running frame support approx. 970 mm extendable forwards with emergency stop button

    ART. NO. 4215

  • LARGE TABLE TOP, SIZE 1340 X 800 MM, WITH TURNTABLE

    And frame support 1340 mm, extendable up to approx. 970 mm instead of standard table top 1100 x 760 mm, option: table top extension Art. No. 4215, table slide not possible

    ART. NO. 4423

  • LARGE TABLE TOP, SIZE 1340 X 800 MM, WITHOUT TURNTABLE

    With frame support 1340 mm extendable up to approx. 970 mm instead of standard table top 1100 x 760 mm, option: table top extension Art. No. 4215

    ART. NO. 4423.1

Accessorial milling spindles and arbors

  • MILLING ARBOR QUICK-CHANGE SYSTEM HSK-80

    With spindle lock and 30 mm milling arbor instead of the standard milling spindle (higher concentricity and no sticking in the spindle as with the MK 5 system or steep taper). Note: other arbors on request.

    ART. NO. 4544

Milling fence accessories

  • MILLING FENCE 311

    Total adjustment is motorised, adjustment range approx. 140 mm, dimensions entered via keypad, total fence displayed on touchscreen +/- 0.1 m; partial fence adjustment (chip removal) +5 mm to -25 mm via a star knob screw on the left side, dimension display via one mm vernier; manual clamping on the machine table via clamping lever screws; milling fence made of die-cast aluminium with 2 face-milled, 500 mm long cast fence plates and aluminium splinter tabs; maximum possible tool diameter is 250 mm

    ART- NO. 4625

  • MILLING FENCE 302

    Total fence adjustment and partial fence adjustment (chip removal) is carried out manually via 2 handwheels, the dimension display for total fence and partial fence via touchscreen +/- 0.1 mm; total fence adjustment, adjustment range approx. 140 mm via handwheel on the left side; partial fence adjustment (chip removal) approx. +10 mm/-22 mm via handwheel on the right-hand side; clamping/fixing on the machine table is done manually via the comfort quick clamping system; milling fence made of die-cast aluminium with 2 face-milled cast fence plates 500 mm long and aluminium splinter tabs; maximum possible tool diameter is 250 mm; Note: The optional turntable is not available in conjunction with milling fence 302. Recommendation: Large table top 1340 x 800 mm No. 4423.1

    ART. NO. 4624

  • MILLING FENCE 320

    Electronic adjustment of total fence and partial fence via 2 motors. Adjustment range of the total fence is 140 mm; adjustment range of the partial fence is +10 mm to -22 mm; control is via the keypad on the touchscreen; total fence and partial fence dimensions are displayed on the touchscreen with an accuracy of +/- 0.1 mm; motorised clamping on the machine table for total and partial fence; milling fence made of die-cast aluminium with 2 face-milled 500 mm long cast fence plates with aluminium splinter tabs; maximum possible tool diameter is 250 mm; Note: The optional turntable is not available in conjunction with milling fence 320. Recommendation: Large table top 1340 x 800 mm No. 4423.1

    ART. NO. 4623

Special accessories

  • RFID MACHINE ACCESS CONTROL

    User database and key system TM-300 for machine access control with personalised keys, full version for authorised and instructed persons, including master key with which parameter settings and employee instructions can be carried out, including 5 tags for different users

    ART. NO. 4654

Accessorial services

  • BRIEFING BY FACTORY TECHNICIAN

    Or training at the Sigmaringen plant for the machine ordered, plus travel expenses if instruction is given at the customer's premises.

    ART. NO. 4172

  • WARRANTY PLUS+12

    12 months extended warranty on parts (following the statutory warranty period of 12 months). Does not apply to wear parts.

    ART. NO. 4259

  • MAINTENANCE AND INSPECTION

    Annual maintenance and inspection on site according to maintenance schedule, spare parts are charged separately, plus travelling expenses incurred.

    ART. NO. 4175

  • INSTALLATION OF A POWER FEEDER

    Delivery to us by the customer with carriage paid delivery

    ART. NO. 4028