(Combined) Dressing and Thicknessing Machine

546|10

(Combined) Dressing and Thicknessing Machine 546|10

Two steps - one machine.

The combined planing machine is designed to do both the dressing and the thickness planing economically with little effort.

Extensive conversion work on the machine is not required between the individual work steps. Dual operation for both processes is possible without additional adjustment.

Simply setting the exact values is enough to get the desired result.

Specific value:
Planer width 630 mm
Planer height 3 - 250 mm
Table length dress 2555 mm
Table length thickness 1100 + 400 mm
Chip removal max. thickness 5 mm
Chip removal max. thickness 8 mm
Knife shaft speed 5000 rpm
Motor power main motor 7,5 kW / 10 HP
Motor power feed motor 0,55 kW / 0,8 HP
0,75 kW / 1,0 HP
Feed 7 + 14 m/min
Suction connecting piece 2 x 160 mm ø
Footprint 2650 x 1770 mm
Weight 1210 kg
Voltage 400 V / 50 Hz
546-10_1000px

thicknesser

solid steel spiral blade shaft

trimming fence

Standard

Standard equipment of the dressing and thicknessing machine 546 | 10
PANHANS Sigmaringen HOKUBEMA Maschinenbau Hobelmaschine 546|10 Dickenhobel

Solid steel spiral blade shaft

Due to their pulling cut, the 6 spiral rows of blades of the solid steel spiral knife shaft cut in significantly improved cutting quality and with longer tool lives. In addition, the enormous noise reduction speaks for the investment in this type of cutting tool.

PANHANS Sigmaringen HOKUBEMA Maschinenbau Hobelmaschine 546|10 Abrichtanschlag

Thicknesser

The thickness planing table of our combined planing machine is mounted on four solid trapezoidal thread spindles with two additional lateral guides as tilt protection. It is parallel and designed for high loads. The absolute precision achieves an optimal planer image.

Abrichtanschlag

Trimming fence

The infinitely swiveling stop can be quickly and easily adjusted to angles between 0 ° - 45 °. The set angle is displayed on a readable scale. The integrated and also pivotable auxiliary stop serves for safe hand support on narrow workpieces.

PANHANS Sigmaringen HOKUBEMA Maschinenbau Hobelmaschine 546|10

Control panel

Using a handwheel, the height of the thicknessing table can be electrically adjusted with an accuracy of 0.1 mm. The set height is displayed via an LED display. Then the height adjustment can be started via the start button.