Tilting spindle moulder

245|200

motorleistung-maschinen-panhans

Motor Power
7.5 kW / 10 HP

spannung-maschinen-panhans

VOLTAGE
400 V / 50 Hz

platzbedarf-maschinen-panhans

W x D in mm
1375 x 1480

With the PANHANS tilting spindle moulder type 245|200, you will always work efficiently and economically in your joinery, carpentry or workshop, as the set-up times and the resulting requirements are considerably reduced thanks to the sophisticated operating concept.

This is made possible, among other things, by the modern touchscreen control with integrated tool database and program memory as well as the 45° tiltable milling spindle on both sides. The spindle (as well as the tool height) can be positioned fully automatically on the basis of target value entries via the touchscreen of the control. Only the safety milling fence must be adjusted manually, whereby the position of the total fence is indicated digitally on the handwheel.

By storing the tool data of various milling cutters and assigning a program, individual machining operations can be called up and executed quickly and easily. The tool memory comprises 5 tools with 20 possible programs each and can optionally be extended to up to 500 tools with 100 programs each.

The spindle, which is tiltable by 45° to the rear, offers the advantage of increased safety as well as the simultaneous use of a (optionally available) power feeder when the spindle is tilted.

Apart from the positioning tasks of the height and tilt axis and the tool database, the network-compatible control still has countless features and safety functions. During operation, it forms the interface between man and machine by monitoring all machine components and shutting down the machine in case of pending problems (malfunctions, errors and dangers). The operator is informed via a message window what is wrong and how to eliminate the pending problem.

The generously dimensioned 7.5 kW three-phase motor is equipped with a wear-free electronic brake and offers sufficient power for all tasks at hand. It is also characterised by its very smooth running. The spindle speed can be conveniently and continuously adjusted in the range 1500 to 10000 rpm via the control.

The high-quality machine components and the generous basic equipment, including all necessary safety devices, leave hardly anything to be desired. Numerous options and useful special accessories are also available.

ART. NO. 4621
panhans-sfm-245-200_1000px

MILLING SPINDLE
Fixed and double-sided tiltable by +/- 45.5° with quick-release nut.

7" TOUCHSCREEN CONTROL
Capacitive touchscreen (scratch and impact resistant), can also be operated with gloves. With language selection menu in German, English and French (other languages on request). It also contains a tool database for up to 5 tools (20 programs are possible per tool). Height and tilt adjustment with electrical position and speed indication, as well as zeroing of height and offset dimension.

PARTIAL FENCE ADJUSTMENT
The partial fence adjustment with chip removal from +5 mm to -25 mm is carried out via a star knob screw on the left-hand side.

SPEED CONTROL
Electronic, infinitely variable speed control from 1,500 - 10,000 rpm (11 kW frequency converter).

OPTION: TABLE EXTENSION
Table extension on both sides with extendable frame support.

OPTION: TABLE SLIDE PLATE
The slide plate enables the table opening to be adjusted quickly and continuously without tools.

DIGITALISATION
Remote maintenance, digital data exchange, machine access control, network-compatible machine, plug and play and HOKUBEMA Cloud.

sfm-245-200_zeichnung-panhans-1000x1000

TECHNICAL SPECIFICATIONS

Table size 1100 x 760 mm

Table height 905 mm

Clamping height 140 mm

Height adjustment 125 mm

Tilt range of +/- 45.5°

Tool and program memory with 5 tools, 20 programs per tool

Infinitely variable speed control 1500 - 10000 rpm

Capacitive 7" touchscreen control, scratch and impact resistant

Protective and pressure device GAMMA V 1629

Ring fence 1639 Tapoa

Milling spindle with quick-release nut 30 mm

Suction nozzles 2 x ø 120 mm

Net weight approx. 880 kg

Play Video

EQUIPMENT DETAILS

245|100 Fraesmasschine PANHANS HOKUBEMA Detail Steuerung
EQUIPMENT DETAILS

CONTROL UNIT

The touchscreen control enables convenient communication between operator and machine. Positioning sequences and command inputs can be controlled directly by touching the smooth monitor surface. Particular emphasis is placed on intuitive and simple operation. For optimum readability, the displays are designed with high brightness and optimum contrast.

OPTIONS

maschinenfreischaltung-digitalisierung-panhans-hokubema
Option

DIGITISATION: MACHINE RELEASE

The electronic key system is a simple and cost-effective solution for reliable and secure machine access control, which was previously realised with a key switch or password.

To the explanatory video on YouTube

plug-and-play-digitalisierung-panhans-hokubema
Option

DIGITALISATION: Plug and play

Thanks to the sophisticated system, the old control unit can be disconnected in the event of a fault and replaced with a new control unit sent by HOKUBEMA. A simple plug-in system and the bundled technology in one control module enable quick and efficient problem solving.

To the explanatory video on YouTube

fernwartung-digitalisierung-panhans-hokubema
Option

DIGITALISATION: Remote maintenance

In the event of a machine malfunction, the system can be accessed remotely and dealt with by the service module. The service technician can then rectify the problem in real time.

cloud-digitalisierung-panhans-hokubema
Option

DIGITALISATION: HOKUBEMA Cloud

The user interface offers a cloud-based connection for networked working. This gives companies greater independence and a powerful software solution with stability, performance and a high level of security. Digital data exchange makes it easy to download and install updates.

View HOKUBEMA-CLOUD

245|100 Fraesmasschine PANHANS HOKUBEMA Detail Spannzangendorn
Option

CLAMPING ARBOR

Optional clamping arbor for the HSK 80 quick-change system. With nut and hook spanner without collet, quick-change milling arbor, dynamically balanced for optimum concentricity for holding shank tools, the necessary collets are required depending on the shank diameter.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag
Option

INTEGRAL FENCE PLATES IN-/OUTFEED SIDE 650/500 MM

With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adjustment to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast iron fence plates.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag
Option

INTEGRAL FENCE PLATES IN-/OUTFEED SIDE 650/650 MM

With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adjustment to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast iron fence plates.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Integralanschlag
Option

Integral fence plates infeed/outfeed side 500/500 mm

With tiltable guide rods integrated into the fence plates for a gapless guide surface for all milling work; precise adaptation to tool diameter and height is achieved by means of infinitely variable adjustment, instead of standard cast fence plates.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Drehteller
Option

TURNTABLE

The turntable can be used to rotate the milling fence type 216 on the machine table by 360°.

Fraesmasschine PANHANS HOKUBEMA Detail Sicherheitslineale
Option

SAFETY GUIDE BAR SET FOR MILLING FENCES

As a continuous guide between the two fence plates, consisting of: 2 safety guide bars 260 x 6 mm, 3 safety guide bars 260 x 3 mm, 1 grooved board made of multiplex 260 x 150 x 12 mm, incl. sliding blocks and Allen key.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat PV 84
Option

POWER FEEDER PV 84

4 rollers 120 x 60 mm, 8 speeds: 2/4/5.6/6.7/11/13/16.5/33 m/min, clockwise and anti-clockwise rotation, stand with extension arm 1050 mm, can be used individually horizontally and vertically, incl. mounting, cable and plug.

Fraesmasschine PANHANS HOKUBEMA Detail Vorschubapparat Variomatic 4 N
Option

POWER FEEDER VARIOMATIC 4 N

4 rollers, infinitely variable feed rate from 2 - 18 m/min clockwise and anti-clockwise rotation, quick change from horizontal to vertical use. Easy swivelling and positioning with memory lock system. With comfort stand, numerical height display, extension arm 1050 mm long, incl. mounting, cable and plug.

245|20 Fraesmasschine PANHANS HOKUBEMA Detail Zeromaster Referenzmass-Einstellgerät
Option

ZEROMASTER CALIBRATOR

For exact 0-point height adjustment and referencing of the cutter head in relation to the table top.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Tischschieber
Option

SLIDE PLATE FOR TABLE TOP 1100 X 760 MM

The patented slide plate with grid structure does not change the overall depth when the table slide is set to the maximum table openings. For easy operation, the distance between the front edge and the spindle remains the same. The table slide is infinitely adjustable in depth. A high fitting accuracy without interfering edges is guaranteed.

Fraesmasschine PANHANS HOKUBEMA Detail Rolltisch
Option

SLIDE TABLE

With fence holder and eccentric clamp, clamping table can be pushed in up to the milling spindle incl. safety guard 1641, suction nozzle Ø 120 mm, with stepped height adjustment, upper position as slide table, lower position as table extension on the left.

Fraesmasschine PANHANS HOKUBEMA Detail Konsole Wegschwenkbar
Option

Swivelling console

Mounted on the left of the machine stand with joint for swivelling away the power feeder, mandatory for slide table no. 4491.1 as well as milling fences 204, 302, 320 and integral fence plates 650 + 650 mm.

Fraesmasschine PANHANS HOKUBEMA Detail Centrex
Option

CENTREX

Protective and pressure device for securely holding workpieces in place during manual milling work; the special shape of the pressure shoe ensures precise workpiece guidance during all milling work, attached to the milling fence, can be folded up, instead of the standard GAMMA V 1629 protective and pressure device.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Zapfenschneid- und Schlitzapparat 1376
Option

TENONING AND SLOTTING DEVICE 1376

Mounted on the machine table for light tenoning and slotting work with eccentric clamp and mitre-adjustable stop. Sliding stroke 710 mm, height above table approx. 56 mm. The safety guard type 1641 must be used when working with the 1376 tenoning and slotting device.

Fraesmasschine PANHANS HOKUBEMA Detail Laengenanschlag LAS M
Option

CROSS-CUT FENCE LAS-M AND EXTENSION

With its length of 1750 mm, the LAS-M cross-cut fence is the ideal complement to the slide table with article number 4491.1. As a further option, the extension to the LAS-M cross-cut fence can be extended up to 2750 mm.

Fraesmasschine PANHANS HOKUBEMA Detail Rolltisch
Option

SLIDE TABLE

With stop fixture and eccentric clamp, clamping table can be pushed in up to the milling spindle, incl. safety guard 1641, suction nozzle Ø 120 mm, with stepped height adjustment, upper position as slide table, lower position as table extension on the left.

Fraesmasschine PANHANS HOKUBEMA Detail Anschlag 302
Option

MILLING FENCE 302

Total and partial fence adjustment (chip removal) is performed manually via 2 handwheels. Adjustment range
of the total fence approx. 140 mm (left), partial fence adjustment approx. +10 mm/-22 mm (right). The dimensional display for total and partial fences is accurate to +/- 0.1 mm via touchscreen. (Photo with optional integral fence plates)

Fraesmasschine PANHANS HOKUBEMA Detail Anschlag 311
Option

MILLING FENCE 311

The total fence adjustment is motorised, the partial fence adjustment (chip removal) is carried out via a star knob screw on the left-hand side. The dimension display for total fence is via touchscreen and for partial fence via a vernier.

Fraesmasschine PANHANS HOKUBEMA Detail Anschlag 320
Option

MILLING FENCE 320

The safety milling fence 320 with total fence and partial fence adjustment (chip removal) is completely electronically controlled. Dimensions are entered via the numeric keypad on the touchscreen and positioning is completely motorised. (Photo with optional integral fence plates)

245|20 Fraesmasschine PANHANS HOKUBEMA Detail HSK-80
Option

MANUAL MILLING ARBOR QUICK-CHANGE SYSTEM HSK-80

Instead of fixed standard milling spindle, optional HSK system as interface for various clamping spigot diameters with 30 mm milling arbor and quick-release nut. Unique system, as it ensures greater concentricity and enables easy replacement of the milling arbours. Other mandrels with different Ø available on request. Optionally with spanner nut instead of quick-release nut.

245_100-Fraesmasschine PANHANS HOKUBEMA Detail Comfort-Wegschwenkvorrichtung für Fräsanschläge
Option

COMFORT SWIVEL-AWAY DEVICE FOR MILLING FENCES

Electromotive raising and lowering, the fence can be rotated 360° around the guide column and also swivelled forwards.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Rueckschlagschutz 1648
Option

KICK-BACK GUARD 1648

For accident-safe insert milling of long and short parts, infinitely adjustable from 0 - 1500 mm for spindle moulders with table top extension.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Tischplattenverlaengerung
Option

TABLE TOP EXTENSION ON BOTH SIDES

For table top 1100 x 760 mm, total length 2300 mm, consisting of 2 pieces of finely planed cast table tops as an extension on the left and right of the standard machine table, with smooth-running frame support approx. 892 mm extendable to the front and with emergency stop button.

245|20 Fraesmasschine PANHANS HOKUBEMA Detail Tischplattenverlaengerung Einseitig
Option

TABLE TOP EXTENSION ONE-SIDED RIGHT

For table top 1340 x 800 mm, consisting of 1 piece of finely planed cast table top as an extension on the right of the standard machine table, therefore total length 1950 mm including smooth-running frame support approx. 970 mm, extendable forwards and with emergency stop button.

245|10 Fraesmasschine PANHANS HOKUBEMA Detail Rahmenauflage ausziehbar
Option

EXTENDABLE FRAME SUPPORT, FOR TABLE TOP 1100 X 760 MM

Total length approx. 1375 mm, extension depth approx. 892 mm from the centre of the milling spindle, guided in separate bearing blocks on the side of the machine table, smooth-running and with emergency stop button.

Fraesmasschine PANHANS HOKUBEMA Detail Konsole Starr
Option

RIGID CONSOLE

For mounting a power feeder approx. 195 x 180 mm on the left side of the table top; mandatory when using milling fences 204, 302, 320 and integral fence plates 650 + 650 mm, with table top 1100 x 760 mm.

Fraesmasschine PANHANS HOKUBEMA Detail HSK-63-F
Option

AUTOMATIC HSK-63-F TOOL CHANGING SYSTEM

Electromechanical clamping system for convenient tool changes. The tool change is actuated via a switch. Includes 1 quick-change arbor HSK-63-F with Ø 30 mm clamping length 140 mm with arbour rings and quick-release nut.